In addition to the products found in this catalog Reliable Equipment & Service Co., Inc. has the ability to provide Sales, Service and Support for any tool available to the Utility and Construction Industries. Consult your Reliable representative for a copy of our Utility Tool Guide for additional tooling solutions from Reliable Equipment & Service Co., Inc.
| ITEM | RELIABLE PRODUCT DESCRIPTION/REFERENCE INFO. |
| 10,000 PSI PUMPS, INTENSIFIERS, VALVES & HOSES | |
| ELECTRIC / HYDRAULIC PUMPS | |
| REL-1915 | ELECTRIC/HYDRAULIC PUMP |
| REL-1915-230 | ELECTRIC/HYDRAULIC PUMP 220-230V |
| REL-EP-115 | ELECTRIC/HYDRAULIC PUMP, CONTINUOUS DUTY |
| REL-EP-230 | ELECTRIC/HYDRAULIC PUMP, CONTINUOUS DUTY |
| ACCESSORIES, ELECTRIC / HYDRAULIC PUMPS | |
| REL-DIR-VALVE | BI-DIRECTIONAL VALVE |
| REL-C-FS-1 | CONTROL, FOOT SWITCH (OPTIONAL) |
| 1915-PS | PENDANT SWITCH (INCLUDED WITH ELECTRIC PUMPS) |
| GAS / HYDRAULIC | |
| REL-HPU-2000 | GAS/HYDRAULIC PUMP – 2,000 PSI |
| REL-GB-10 | GAS/HYDRAULIC PUMP – 10,000 PSI |
| INTENSIFIER & INTENSIFIER/VALVE | |
| REL-10-I | INTENSIFIER |
| REL-10-I-SA | SINGLE ACTING INTENSIFIER/VALVE |
| REL-10-I-SA/D | HIGH PRESSURE SINGLE/DOUBLE ACTING INTENSIFIER/VALVE |
| INSTALLATION DIAGRAM | REL-10-I-SA/D |
| ACCESSORIES, INTENSIFIER VALVE | |
| UL-BCA | INTENSIFIER BUCKET |
| DOUBLE ACTING HYDRAULIC TOOLS | |
| INTRODUCTION TO DOUBLE ACTING HYDRAULIC | DIAGRAM |
| TYPICAL DOUBLE ACTING CUTTING OR CRIMPING SYSTEM | DIAGRAM |
| DOUBLE ACTING DIRECT CONNECT SYSTEM | DIAGRAM |
| IN-LINE CONTROL VALVES | |
| PVA 0021 | SINGLE ACTING VALVE |
| PVA 0021 3VE3-72 | SINGLE ACTING VALVE W/ 6′ HOSE |
| PVA 0022 | DBL ACTING COUPLED VALVE |
| PVA 0022 3VE3-72 | DBL ACTING COUPLED VALVE W/ 6′ HP HOSE |
| PVA 1122 | DBL ACTING DIR CONNECT VALVE |
| PVA 1122 3VE3-72 | DBL ACTING DIR CONNECT VALVE W/ 6′ HP HOSE |
| ACCESSORIES, IN-LINE CONTROL VALVES | |
| REL-DAC | DA DIRECT CONNECT TO DA COUPLED ADAPTER |
| REL-SAC | DA DIRECT CONNECT TO SA COUPLED ADAPTER (Not Shown) |
| TYPICAL HIGH PRESSURE DBL ACTING TOOL SETUP | DIAGRAM |
| HOSES | |
| LOW PRESSURE HOSES (2,000 PSI) | |
| REL-2250-__-A | LP HOSE SET (Please Specify Length Required) |
| HIGH PRESSURE HOSES (10,000 PSI) | |
| 3VE3-___ | 3/16″ HP HOSE (Single Hose) (Please Specify Length Required) |
| 3VE4-___ | 1/4″ HP HOSE |
| COMRESSION TOOLS | |
| DIELESS COMPRESSION TOOLS | |
| REL-750DM | 6 TON DIELESS MANUAL TOOL |
| REL-750DH | 6 TON DIELESS HEAD |
| REL-IND-105 | INDENT TOOL |
| MANUAL COMPRESSION TOOLS | |
| REL-642S | MANUAL COMPRESSION TOOL (CROSS FOR XPJ TOOL) |
| REL-BG | MANUAL COMPRESSION TOOL – “W” STYLE W/ FIXED BG |
| REL-O | MANUAL COMPRESSION TOOL – “W” STYLE W/ FIXED O |
| REL-SN | MANUAL COMPRESSION TOOL – “W” STYLE SNUB NOSE |
| REL-K58 | MANUAL COMPRESSION TOOL – KEARNEY STYLE W/ FIXED BG |
| REL-KO | MANUAL COMPRESSION TOOL – KEARNEY STYLE W/ FIXED O |
| REL-BG-FG | MANUAL COMPRESSION TOOL – FIBERGLASS HANDLE |
| REL-KO-FG | MANUAL COMPRESSION TOOL – FIBERGLASS HANDLE – KEARNEY |
| REL-K58-FG | MANUAL COMPRESSION TOOL – FIBERGLASS HANDLE – KEARNEY |
| REL-BG-FGBH | MANUAL COMPRESSION TOOL – FIBERGLASS BENT HANDLE |
| REL-O-FGBH | MANUAL COMPRESSION TOOL – FIBERGLASS BENT HANDLE |
| REL-K58-FGBH | MANUAL COMPRESSION TOOL – FIBERGLASS BENT HANDLE – KEARNEY |
| REL-KO-FGBH | MANUAL COMPRESSION TOOL – FIBERGLASS BENT HANDLE – KEARNEY |
| REL-SN-FGBH | MANUAL COMPRESSION TOOL – “W” STYLE SNUB NOSE – FIBERGLASS BENT HANDLE |
| MANUAL HYDRAULIC CRIMPERS | |
| REL-6TN-M | 6.6 TON MANUAL HYDRAULIC CRIMPING TOOL “C” STYLE |
| REL-430 | 12 TON MANUAL HYD. CRIMPING TOOL 430 HEAD – “U” STYLE |
| REL-510 | 12 TON MANUAL HYD. CRIMPING TOOL 510 HEAD – “U” STYLE |
| REL-510K | 12 TON. MANUAL HYD. CRIMPING TOOL 510K HEAD – KEARNY STYLE |
| LOW PRESSURE HYDRAULIC CRIMPING TOOLS (2,000 PSI) | |
| REL-LP-1.5 | LOW PRESSURE 12 TON HYD. CRIMPING TOOL – “U” STYLE |
| REL-LP-K | LOW PRESSURE 12 TON HYD. CRIMPING TOOL – KEARNEY STYLE |
| REL-LP-6TN | LOW PRESSURE 6 TON HYD. CRIMPING TOOL – “W” STYLE – C TYPE JAW |
| REL-POC-BG | 6 TON HYD. CRIMPING TOOL – OPEN CENTER – “W” STYLE FIXED BG PARROT |
| REL-POC-O | 6 TON HYD. CRIMPING TOOL – OPEN CENTER – “W” STYLE FIXED O PARROT |
| REL-POC-K__ | 6 TON HYD. CRIMPING TOOL – OPEN CENTER – KEARNEY STYLE FIXED O PARROT |
| REL-POC-SN | 6 TON HYD. CRIMPING TOOL – OPEN CENTER – “W” STYLE SNUB NOSE PARROT |
| REL-PCC-BG | 6 TON HYD. CRIMPING TOOL – CLOSED CENTER – “W” STYLE FIXED BG PARROT |
| REL-PCC-O | 6 TON HYD. CRIMPING TOOL – CLOSED CENTER – “W” STYLE FIXED O PARROT |
| REL-PCC-K__ | 6 TON HYD. CRIMPING TOOL – CLOSED CENTER – KEARNEY STYLE FIXED O PARROT |
| REL-PCC-SN | 6 TON HYD. CRIMPING TOOL – CLOSED CENTER – “W” STYLE SNUB NOSE PARROT |
| ACCESSORIES, LOW PRESSURE HYDRAULIC CRIMPING TOOLS (2,000 PSI) | |
| REL-LP6-BH | HOLSTER FOR LOW PRESSURE 6TN (POC & PCC STYLES ONLY) |
| REL-LP6-BHA | HOLSTER FOR LOW PRESSURE 6TN (LP SERIES 6 TON ALL MODELS) NOT SHOWN |
| HIGH PRESSURE HYDRAULIC CRIMPERS (10,000 PSI) | |
| SINGLE ACTING CRIMPERS | |
| REL-6TN-RH | 6.6 TON SINGLE ACTING REMOTE HYDRAULIC “C” TYPE HEAD |
| REL-510H | 12 TON HYD. CRIMPING HEAD – SINGLE ACTING – “U” STYLE |
| REL-510HK | 12 TON KEARNEY STYLE SA REMOTE HEAD |
| REL-46 | 15 TON HYD. CRIMPING HEAD – SINGLE ACTING – “P” STYLE |
| REL-60SA | 60 TON HYD. CRIMPING HEAD – SINGLE ACTING – SHELL TYPE DIES |
| REL-100SDA | 100 TON HYD. CRIMPING HEAD – CONVERTIBLE SA/DA – SHELL TYPE DIES |
| DOUBLE ACTING CRIMPERS | |
| PDY-6.6-BG | 6 TON HYD. CRIMPING HEAD – “W” STYLE W/ FIXED BG – PARROT |
| PDY-6.6-K58 | 6 TON HYD. CRIMPING HEAD – KEARNEY STYLE W/ FIXED BG- PARROT |
| PDY-6.6-KO | 6 TON HYD. CRIMPING HEAD – KEARNEY STYLE W/ FIXED O- PARROT |
| PDY-6.6-O | 6 TON HYD. CRIMPING HEAD – “W” STYLE W/ FIXED O – PARROT |
| PDY-6.6-SN | 6 TON HYD. CRIMPING HEAD – “W” STYLE – PARROT |
| PDY-1220 | 12 TON HYD. CRIMPING HEAD – “U” STYLE |
| PDY-510 | 12 TON HYD. CRIMPING HEAD – “U” STYLE |
| PDY-2102 | 10 TON HYD. CRIMPING HEAD – “U” STYLE |
| PDY-1524 | 15 TON HYD. CRIMPING HEAD – “P” STYLE |
| REL-60DA | 60 TON HYD. CRIMPING HEAD – DBL ACTING – SHELL TYPE DIE |
| REL-100SDA | 100 TON HYD. CRIMPING HEAD – CONVERTIBLE SA/DA – SHELL TYPE DIES |
| COMPRESSION DIES & ADAPTERS | |
| R100 DIES | 100 TON SHELL TYPE DIES |
| R12 DIES | 12 TON “U” STYLE DIES |
| R12 RT or ART | 12 TON “U” STYLE DIES |
| R12-T-D | COMPRESSION TEST DIE |
| R15 DIES | 15 TON “P” STYLE DIES |
| PU-15S | 15 TON “P” – “U” STYLE DIE ADAPTER |
| R6 DIES | 6 TON “W” STYLE DIES |
| R60 DIES | 60 TON SHELL TYPE DIES |
| REL-6TN-DIE BOX | DIE BOX FOR “W” STYLE DIES |
| REL-12TN-DIE BOX | DIE BOX FOR “U” STYLE DIES |
| REL-60TN-DBX | 60 TON DIE BOX |
| CUTTING TOOLS | |
| MANUAL CUTTING TOOLS | |
| REL-500 | CUTTER |
| REL-1000 | CUTTER |
| REL-2000 | CUTTER |
| RATCHETING CUTTERS | |
| REL-35 | ONE HAND RATCHET CUTTER |
| REL-750 | RATCHET CUTTER |
| REL-9009 | ONE HAND RATCHETING CUTTER |
| RC750H | RATCHETING CABLE CUTTER – 750 MCM |
| RC1000A | RATCHETING CABLE CUTTER – 1000 MCM |
| RC-954H | RATCHETING CABLE CUTTER – 954 MCM |
| MANUAL HYDRAULIC CUTTERS | |
| REL-58MC | MANUAL HYDRAULIC CUTTING TOOL |
| REL-2000MC | 2″ MANUAL HYD. CUTTER |
| HIGH PRESSURE HYDRAULIC CUTTER HEADS (10,000 PSI) | |
| SINGLE ACTING CUTTER HEADS | |
| REL-58RH | SA REMOTE CUTTER HEAD |
| HP 4707SA | HYD. CUTTING TOOL – SINGLE ACTING – 1.25″ CAPACITY |
| REL-2000SA | SINGLE ACTING HYDRAULIC CUTTER HEAD |
| REL-3000SA | SINGLE ACTING HYDRAULIC CUTTER HEAD |
| REL-4000SA | HYDRAULIC 4″ CUTTER |
| DOUBLE ACTING CUTTER HEADS | |
| HP 4707S | HYD. CUTTING TOOL – DBL ACTING DIRECT CONNECT – 1.25″ CAPACITY |
| PDC-2000 | HYD. CUTTING TOOL – DBL ACTING DIRECT CONNECT – 2.0″ CAPACITY |
| PDC-3000 | HYD. CUTTING TOOL – DBL ACTING DIRECT CONNECT – 3.35″ CAPACITY |
| REL-6000DA | HYD. CUTTING TOOL – DBL ACTING DIRECT CONNECT – 6″ CAPACITY |
| HYDRAULIC HOT STICK EXTENSION KIT | |
| REL-HOT-1 | HYD. HOT STICK EXTENSION (SINGLE ACTING ASSEMBLY) |
| REL-HSE-K | HYD. HOT STICK EXTENSION KIT (SINGLE OR DOUBLE ACTING ASSEMBLY) |
| SPEARING TOOLS | |
| MANUAL SPEARING TOOLS | |
| REL-ST-C | MANUAL SPEARING TOOL – CHISEL POINT |
| REL-ST-E | MANUAL SPEARING TOOL – EXTENSION |
| REL-ST-P | MANUAL SPEARING TOOL – MOIL POINT |
| H/P HYDRAULIC SPEARING TOOLS | |
| ST-200 | SINGLE ACTING HYD. SPEARING TOOL – 4/0 – 2.25″ OD |
| REL-117ST | DBL ACTING HYD. SPEARING TOOL – 4/0 – 4.0″ OD |
| REL-117STM | DBL ACTING HYD. SPEARING TOOL – 3.0 – 6.0″ OD |
| REL-ST-10 | SINGLE ACTING HYD. SPEARING TOOL – 6.0 – 10.0″ OD |
| ACCESSORIES, H/P HYDRAULIC SPEARING TOOLS | |
| 12652 | REPLACEMENT SPIKE PROBES (BOX OF 20) |
| HYDRAULIC PUNCH (10,000PSI) | |
| REL-35T-PNC | HYDRAULIC 35 TON STEEL PUNCH |
| R-35TN – 7/16 | 7/16 Punch & Die Set for 3/8″ Bolt |
| R-35TN – 9/16 | 9/16 Punch & Die Set for 1/2″ Bolt |
| R-35TN – 11/16 | 11/16 Punch & Die Set for 5/8″ Bolt |
| R-35TN – 13/16 | 13/16 Punch & Die Set for 3/4″ Bolt |
| LOW PRESSURE – LINE, CONSTRUCTION & CLEARANCE TOOLS ( 2,000 PSI) | |
| HYDRAULIC IMPACT WRENCH | |
| REL-425C | HYD. IMPACT – 7/16″ HEX QC (shown with optional trigger guard) |
| REL-425CG | HYD. IMPACT – 7/16″ HEX QC WITH TRIGGER GUARD |
| REL-425C-1/2 | HYD. IMPACT – 1/2″ SQ. DRIVE NOSE |
| ACCESSORIES, IMPACT | |
| WJ-1137-P | 7/16″ HEX ADAPTER |
| REL-ED-16 | 1″ EXTRA DEEP 8 PT. SOCKET |
| REL-ED-18 | 1-1/8″ EXTRA DEEP 8 PT. SOCKET |
| REL-IH | IMPACT HOLSTER |
| REL-1/2SS | 15 PC. 8 PT. DEEP IMPACT SOCKET SET |
| BJH-1-5/8 | 1 – 5/8″ J HOOK PULLER |
| BJH-1-7/16 | 1 – 7/16″ J HOOK PULLER |
| PSD-2-5/8 | 2 – 5/8″ POLE STEP DRIVER |
| PSD-2-7/16 | 2 – 7/16″ POLE STEP DRIVER |
| SAWS | |
| REL-CS16 | HYDRAULIC CHAIN SAW – 16″ BAR, 14″ CUT |
| LR-62.5 | LONG REACH HYD. CHAIN SAW – 62.5″ |
| LR-75 | LONG REACH HYD. CHAIN SAW – 75″ |
| LR-88.5 | LONG REACH HYD. CHAIN SAW – 88.5″ |
| LR-CS-82 | LONG REACH CIRCULAR SAW – 82″ |
| HYDRAULIC AUGER | |
| REL-EA250 | HYDRAULIC AUGER |
| HYDRAULIC TAMPERS | |
| REL-TMP-60 | HYDRAULIC TAMPER (NO VALVE) |
| REL-TMP-60V | HYDRAULIC TAMPER W/ VALVE ON HOSE |
| REL-TMP-72 | HYDRAULIC TAMPER W/ VALVE ON TUBE |
| ACCESSORIES, HYDRAULIC TAMPERS | |
| R27600 | IN-LINE TOGGLE VALVE (NOT SHOWN) |
| R27085 | ROUND FOOT (NOT SHOWN) |
| R27021 | KIDNEY (HALF MOON) FOOT (STANDARD) |
| HYDRAULIC GROUND ROD DRIVERS | |
| REL-GRD-1 | HYDRAULIC GROUND ROD DRIVER |
| MANUAL GROUND ROD DRIVERS | |
| REL-MGRD | GROUNDER, TEMP. TRUCK (kit w/ threaded rod) |
| REL-MGRD-TH | GROUNDER, TEMP. TRUCK (kit w/ threaded rod and handles) |
| REL-GR-ADP | REL-MGRD ADAPTER (for unthreaded rod) |
| REL-MGRDH | MAN. GROUND ROD DRIVER (smooth w handles) |
| REL-MGRDNH | MANUAL GROUND ROD DRIVER (smooth NO handles) |
| SIGN POST DRIVER & PULLER | |
| REL-SPD | HYD. SIGN POST DRIVER |
| REL-SPD ACCESSORIES | SIGN POST DRIVER ACCESSORIES |
| REL-SPP | HYD. SIGN POST PULLER |
| HYDRAULIC SUBMERSIBLE PUMPS | |
| REL-TP3 | 3 INCH TRASH PUMP |
| REL-SP2 | 2 INCH SUBMERSIBLE PUMP |
| MANUAL HOISTS | |
| REL-1500H | 3/4 TON ROLLER CHAIN HOIST |
| REL-3000H | 1-1/2 TON ROLLER CHAIN HOIST |
| REL-6000H | 3 TON ROLLER CHAIN HOIST |
| REL-12000H | 6 TON ROLLER CHAIN HOIST |
| REL-1500CH | 3/4 TON LINK CHAIN HOIST |
| REL-3000CH | 1 TON LINK CHAIN HOIST |
| REL-CH-3000 | 3/4 TON ROLLER CHAIN HOIST |
| REL-CH-6000 | 1-1/2 TON ROLLER CHAIN HOIST |
| ELECTRIC CAPSTAN | |
| REL-CH-1000 | ELECTRIC CAPSTAN HOIST |
| REL-CH-1000B | ELECTRIC CAPSTAN HOIST W/ BOX |
| ACCESSORIES, ELECTRIC CAPSTAN | |
| R-CH-BRACKET | POLE BRACKET FOR CAPSTAN HOIST |
| REL-H-MOUNT | HITCH MOUNT FOR REL-CH1000 |
| REL-C-FS-1 | CONTROL FOOT SWITCH |
| REL-CH-1000BX | STEEL BOX FOR CAPSTAN HOIST |
| SPECIALTY WRENCHES (i.e. Lineman’s, Transmission, and Penta) | |
| REL-LTW | LINEMAN’S WRENCH (REL-151T) (C/F FOR QTY PRICES) |
| REL-LTRW | LINEMAN’S TRANSMISSION WRENCH (REL-152D) (C/F FOR QTY PRICES) |
| REL-PSW | RATCHETING PENTA SOCKET WRENCH |
| REL-PSWH | RATCHETING PENTA SOCKET WRENCH W 5/16″ HEX |
| REL-PSW-S | RATCHETING PENTA SOCKET WRENCH – SHORT |
| REL-RW516 | RATCHETING WRENCH – 5/16″ HEX |
| UTILITY ACCESSORIES | |
| TEST & MEASURING | |
| REL-FPG | IN-LINE FLOW PRESSURE GUAGE |
| REL-PG-LP | IN-LINE PRESSURE GAUGE – 3,000 PSI |
| REL-PG-1-1/4 | IN-LINE PRESSURE GAUGE – 10,000 PSI |
| REL-PG-1-3/8 | IN-LINE PRESSURE GAUGE – 10,000 PSI |
| REL-CG-12TN | COMPRESSION LOAD CELL |
| R12-TD | 12 TON COMPRESSION TEST DIE |
| STRINGING BLOCK & ACCESSORIES | |
| REL-SB7 | UNIVERSAL ROLLER |
| REL-SBCAB | CROSS ARM BRACKET |
| REL-SBBC | BALL CLEVIS |
| REL-SBSH | SAFETY HOOH |
| REL-SBYBC | Y BALL CLEVIS |
| COLLAPSIBLE REEL | |
| REL-CR | COLLAPSIBLE REEL |
| CABLE PREPARATION | |
| REL-ACSR-CT | ACSR CABLE TRIMMER |
| PULLING EYE & HOOKS | |
| R-PE | ANCHOR ROD PULLING EYE |
| REL-9055 & REL-9062 | PULLING HOOKS FOR DEADENDS & STRANDVISE |
| GRIPS | |
| REL-5000-WG | WIRE GRIP 5000 LBS. |
| REL-10000-WG | WIRE GRIP 10000 LBS. |
| REL-12000-WG | WIRE GRIP 12000 LBS. |
| BLOCKS & ACCESSORIES | |
| REL-HLB-3 | HAND LINE BLOCK |
| REL-HLB-3M | HAND LINE BLOCK W/ MEAT HOOK |
| REL-HLH | HANDLINE HOOK NOT SHOWN |
| BAGS, BUCKETS & HOLSTERS & LINE ACCESSORIES | |
| REL-1215P-SNAP | SNAP BUCKET BAG |
| REL-1579 | OVAL BAG |
| REL-1718 | SLEEVE GLOVE BAG |
| REL-IH | IMPACT HOLSTER |
| UL-BCA | INTENSIFIER BUCKET |
| REL-BH | BUCKET MOUNT LIGHT HOLDER |
| REL-BHY | PLASTIC BUCKET HOOK |
| REL-BP | NYLON BLANKET PIN |
| REL-DFH | DISCONNECT FUSE HOOK |
| TEMPORARY GROUNDING | |
| R-T-GRND | SCREW GROUND |
| MADE TO ORDER ITEMS – Please Contact Your Reliable Representative | |
| CUSTOM GROUNDING & JUMPERS | CONTACT YOUR RELIABLE REPRESENTATIVE |
| HYDRAULIC ACCESSORIES – MISC. | |
| COUPLERS | |
| 0507-6-6 | 3/8″ ADAPTER, L/P SWIVEL (used W/ hard plumbed hoses) |
| 0507-8-6 | 1/2″ ADAPTER, L/P SWIVEL (used W/ hard plumbed hoses) |
| FF-370-6FP | 3/8″ L/P QUICK COUPLINGS SET – FF-371-6FP (Female) FF-372-6FP (Male) |
| 6-3/8F50F-S | ADAPTER, L/P SWIVEL ( used W/ FF couplers) |
| 8-3/8F50F-S | ADAPTER, L/P SWIVEL ( used W/ FF couplers) |
| 3050-3/3005-3 | 3/8″ (Female) HIGH PRESSURE COUPLING (for tools) |
| 3010-3/3009-3 | 3/8″ (Male) HIGH PRESSURE COUPLING (for tools) |
| 3/8 FF-S | 3/8″ Male / Male Adapter used with 3010-3 (for tools) |
| 3050-3 231 | 3/8″ (Female) H/P COUPLING (female thread for hose) |
| 3010-3 | 3/8″ (Male) H/P COUPLING W CAP (female thread for hose) |